외장 하드 드라이브에서 Kubuntu를 실행하고 있습니다. 내 내장 하드 드라이브에는 Windows가 있습니다. 우분투에서 사용하고 싶지 않고 열을 적게 생산하고 배터리를 적게 소비하기 위해 전원을 끄고 싶습니다. 하드 드라이브를 다운시키는 것이 옵션이 아니라고 생각합니다. 왜냐하면 그것은 하드 드라이브를 닳아서 HDD에 쓸 계획이 없기 때문입니다. 🙂
답변
sudo hdparm -Y /dev/sdX
여기서 / dev / sdX 는 끄려 는 장치입니다. 또한 sudo blkid
장치의 ‘지문'(UUID)을 결정하여 어떤 장치가 꺼 졌는지보다 확실하게 제어 할 수 있습니다.
이 경우 다음을 실행합니다.
sudo hdparm -Y /dev/disk/by-uuid/DEVICE-IDENT-HERE
남자 hdparm
-Y Force an IDE drive to immediately enter the lowest power
consumption sleep mode, causing it to shut down completely. A
hard or soft reset is required before the drive can be accessed
again (the Linux IDE driver will automatically handle issuing a
reset if/when needed). The current power mode status can be
checked using the -C option.
답변
다음을 사용할 수 있습니다 (여기 sdc
에서 해당 블록 장치의 이름이 있음).
sync
echo 1 > /sys/block/sdc/device/delete
답변
udisks2
패키지가 설치 되었을 수 있습니다 . 당신이 사용할 수있는
udisksctl power-off -b /dev/sdX
/dev/sdX
끄려는 장치는 어디에 있습니까 ?
에서 udisksctl
man 페이지 (버전 2.7.6)
power-off
Arranges for the drive to be safely removed and powered off. On the OS
side this includes ensuring that no process is using the drive, then
requesting that in-flight buffers and caches are committed to stable
storage. The exact steps for powering off the drive depends on the
drive itself and the interconnect used. For drives connected through
USB, the effect is that the USB device will be deconfigured followed
by disabling the upstream hub port it is connected to.
Note that as some physical devices contain multiple drives (for
example 4-in-1 flash card reader USB devices) powering off one drive
may affect other drives. As such there are not a lot of guarantees
associated with performing this action. Usually the effect is that the
drive disappears as if it was unplugged.